INSTRUMENT PANEL SAFETY PAD > REASSEMBLY |
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) |
Install the antenna with the 2 screws.
Attach the clamp.
| 2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR |
![]() |
Attach the 2 claws to install the sensor.
Connect the connector.
| 3. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
![]() |
Attach the 5 hooks (A).
| *a | Hook A |
| *b | Hook B |
Attach the 5 hooks (B) to install the instrument panel passenger airbag.
Install the 2 screws.
| 4. INSTALL NO. 2 INSTRUMENT PANEL WIRE |
Attach the 17 clamps to install the No. 2 instrument panel wire.
Connect the connector.
| 5. INSTALL TELLTALE LIGHT ASSEMBLY |
Connect the connector.
Attach the 4 claws to install the security indicator light assembly.
| 6. INSTALL ACCESSORY METER ASSEMBLY |
Connect the connector.
Install the accessory meter assembly with the 2 screws.
| 7. INSTALL DEFROSTER NOZZLE ASSEMBLY |
Install the defroster nozzle assembly with the 3 screws.
| 8. INSTALL NO. 3 HEATER TO REGISTER DUCT |
Attach the claw.
Install the No. 3 heater to register duct with the 2 screws.
| 9. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws.
Install the No. 2 side defroster nozzle duct with the screw.
| 10. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws.
Install the No. 1 side defroster nozzle duct with the screw.
| 11. INSTALL NO. 2 HEATER TO REGISTER DUCT |
Install the No. 2 heater to register duct with the 4 screws.
| 12. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the No. 1 heater to register duct with the 4 screws.