Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR CONSOLE BOX ASSEMBLY
  1. Connect each connector.

  1. Attach the 2 guides.

  1. Install the rear console box assembly with the 4 bolts and 2 screws.



2. INSTALL NO. 2 CONSOLE BOX RETAINER
  1. Attach the clip, 2 claws and 2 guides to install the No. 2 console box retainer.



3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.



  1. Attach the 10 clips to install the upper console panel sub-assembly.


    B354448E01


    Text in Illustration 
    *A
    for VF2A
    *B
    for VF2BM, VF4BM
    *C
    for 2WD
    -
    -



4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)


    B353462
  1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B353463
  1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.



6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
  1. Attach the 2 clips and 2 guides to install the front No. 1 console box insert.



7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
  1. Attach the 2 clips and guide to install the front No. 2 console box insert.



8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Attach the 5 clips to install the No. 1 instrument cluster finish panel garnish.



9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Attach the 5 clips to install the No. 2 instrument cluster finish panel garnish.