Home › Engine / Hybrid System › 1GR-FE STARTING › ENGINE SWITCH

ENGINE SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL ENGINE SWITCH
  1. Attach the 2 claws to install the engine switch.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
  1. Connect the engine switch connector.

  1. Attach the 4 clips to install the lower instrument panel finish panel assembly.



3. INSTALL LOWER STEERING COLUMN COVER
  1. Attach the 2 claws to install the lower steering column cover.

  1. Install the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 2 screws.