Home › Engine / Hybrid System › 1GR-FE STARTING › ENGINE SWITCH

ENGINE SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LOWER STEERING COLUMN COVER


    A225246
  1. Remove the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to remove the 2 screws.

  1. Detach the 2 claws to remove the lower steering column cover.



2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    A225247
  1. Detach the 4 clips.

  1. Disconnect the engine switch connector and remove the lower instrument panel finish panel.



3. REMOVE ENGINE SWITCH


    A196762
  1. Detach the 2 claws and remove the engine switch from the lower instrument panel finish panel.