Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR (for Rear)

ULTRASONIC SENSOR (for Rear) > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 ULTRASONIC SENSOR


E198662E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (E) - 2 (S)
    Always
    20 to 40 kΩ

    If the result is not as specified, replace the No. 1 ultrasonic sensor.