Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH

SEAT MEMORY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT SEAT MEMORY SWITCH


B356442E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (M1) - 1 (E)
    1 switch pressed
    Below 1 Ω
    4 (M2) - 1 (E)
    2 switch pressed
    2 (MRY) - 1 (E)
    SET switch pressed

    If the result is not as specified, replace the seat memory switch.
    Text in Illustration 
    *1
    SET Switch
    *2
    1 Switch
    *3
    2 Switch
    *a
    Component without harness connected
    (Seat Memory Switch)