Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY

SECURITY INDICATOR LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SECURITY INDICATOR LIGHT ASSEMBLY


    B216769E05
  1. Apply battery voltage between the terminals of the security indicator light assembly, and check that the security indicator light illuminates.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → 6 (LP)
    Battery negative (-) → 1 (E)
    Security indicator light illuminates
    Text in Illustration 
    *a
    Component without harness connected
    (Security Indicator Light Assembly)

    If the result is not as specified, replace the security indicator light assembly.