Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH

CLEARANCE SONAR MAIN SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 SWITCH HOLE BASE


    B239275
  1. Detach the 6 clips and 2 guides.

  1. Disconnect each connector and remove the No. 2 switch hole base.



2. REMOVE BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY


E198646
  1. Detach the 2 claws and remove the back sonar or clearance sonar switch.