Home › Vehicle Exterior › HORN › HORN

HORN > INSTALLATION

for Preparation Click here



1. INSTALL LOW PITCHED HORN ASSEMBLY
  1. Install the low pitched horn assembly with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the connector.



2. INSTALL RADIATOR GRILLE BRACKET
  1. Install the radiator grille bracket with the 3 bolts.



3. INSTALL HIGH PITCHED HORN ASSEMBLY
  1. Install the high pitched horn assembly with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the connector.



4. INSTALL UPPER RADIATOR SUPPORT SEAL
  1. Install the upper radiator support seal with the 13 clips.