HORN > INSPECTION |
| 1. INSPECT HIGH PITCHED HORN ASSEMBLY |
![]() |
Apply battery voltage and check the operation of the horn according to the table below.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 1 Battery negative (-) → Body ground | High pitched horn sounds |
| *1 | Terminal 1 |
| 2. INSPECT LOW PITCHED HORN ASSEMBLY |
![]() |
Apply battery voltage and check the operation of the horn according to the table below.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 1 Battery negative (-) → Body ground | Low pitched horn sounds |
| *1 | Terminal 1 |