Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    B354485E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape



    B354484
  1. Detach the 10 claws and 2 guides to remove the radiator grille.



2. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ License Plate Bracket)


    B353208
  1. Remove the 2 screws to remove the front bumper extension mounting bracket.



3. REMOVE LOWER FRONT VALANCE PANEL (w/ Garnish)


    B353209
  1. Remove the 13 outside moulding retainers and lower front valance panel as shown in the illustration.



4. REMOVE LOWER NO. 1 RADIATOR GRILLE


    B353210
  1. Remove the clip.

  1. Detach the 13 claws to remove the lower No. 1 radiator grille.



5. REMOVE FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side)


    B353211
  1. Detach the 2 claws and guide to remove the front bumper reinforcement stopper RH.



6. REMOVE FOG LIGHT ASSEMBLY LH


    E280416
  1. Remove the 2 screws.

  1. Detach the 2 guides to remove the fog light assembly LH.



7. REMOVE FOG LIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



8. REMOVE FOG LIGHT COVER LH


    B353212
  1. Remove the outside moulding retainer.

  1. Detach the 5 claws to remove the fog light cover LH.



9. REMOVE FOG LIGHT COVER RH

HINT:
Use the same procedure as for the LH side.