Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER

FRONT BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL FOG LIGHT COVER LH
  1. Attach the 5 claws to install the fog light cover LH.

  1. Install the outside moulding retainer.



2. INSTALL FOG LIGHT COVER RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL FOG LIGHT ASSEMBLY LH
  1. Attach the 2 guides.

  1. Install the fog light assembly LH with the 2 screws.



4. INSTALL FOG LIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



5. INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side)
  1. Attach the guide and 2 claws to install the front bumper reinforcement stopper RH.



6. INSTALL LOWER NO. 1 RADIATOR GRILLE
  1. Attach the 13 claws to install the lower No. 1 radiator grille.

  1. Install the clip.



7. INSTALL LOWER FRONT VALANCE PANEL (w/ Garnish)
  1. Install the lower front valance panel with the 13 outside moulding retainers.



8. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ License Plate Bracket)
  1. Install the front bumper extension mounting bracket with the 2 screws.



9. INSTALL RADIATOR GRILLE
  1. Attach the 10 claws and 2 guides to install the radiator grille.