Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER LOWER COVER (w/ Garnish)


    B353233
  1. Remove the 2 clips and 14 outside moulding retainers.

  1. Detach the claw to remove the rear bumper lower cover



2. REMOVE REAR BUMPER EXTENSION (w/o Pintle Hook)


    B354486
  1. Remove the 2 clips and 2 outside moulding retainers.

  1. Detach the 4 claws to remove the rear bumper extension.



3. REMOVE REAR BUMPER EXTENSION (w/ Pintle Hook)


    B353234
  1. Remove the 2 clips and 2 outside moulding retainers.

  1. Detach the 4 claws to remove the rear bumper extension.



4. REMOVE REAR BUMPER SIDE BRACKET LH


    B353490
  1. Remove the clip and 2 screws.

  1. Detach the guide to remove the rear bumper side bracket LH.



5. REMOVE REAR BUMPER SIDE BRACKET RH

HINT:
Use the same procedure as for the LH side.