Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER SIDE BRACKET LH
  1. Attach the guide.

  1. Install the rear bumper side bracket LH with the 2 screws and clip.



2. INSTALL REAR BUMPER SIDE BRACKET RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR BUMPER EXTENSION (w/o Pintle Hook)
  1. Attach the 4 claws to install the rear bumper extension.

  1. Install the 2 clips and 2 outside moulding retainers.



4. INSTALL REAR BUMPER EXTENSION (w/ Pintle Hook)
  1. Attach the 4 claws to install the rear bumper extension.

  1. Install the 2 clips and 2 outside moulding retainers.



5. INSTALL REAR BUMPER LOWER COVER (w/ Garnish)
  1. Attach the claw to install the rear bumper lower cover.

  1. Install the 14 outside moulding retainers and 2 clips.