Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE STEP

SIDE STEP > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE SIDE STEP BRACKET LH


B239977
  1. Remove the 2 bolts and side step bracket.



2. REMOVE NO. 2 SIDE STEP BRACKET LH


B240326
  1. Remove the 2 bolts and No. 2 side step bracket.



3. REMOVE NO. 3 SIDE STEP BRACKET LH


B240325
  1. Remove the 2 bolts and No. 3 side step bracket.



4. REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR


B239979
  1. Remove the 2 screws and No. 6 rocker panel moulding protector.



5. REMOVE STEP PLATE LH
  1. Remove the 2 bolts.



  1. Detach the 9 claws and 8 clips and remove the step plate.


    B239978