Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE STEP

SIDE STEP > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL STEP PLATE LH
  1. Attach the 9 claws and 8 clips to install the step plate.

  1. Install the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



2. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR
  1. Install the No. 6 rocker panel moulding protector with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



3. INSTALL SIDE STEP BRACKET LH
  1. Install the side step bracket with the 2 bolts.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }



4. INSTALL NO. 2 SIDE STEP BRACKET LH
  1. Install the No. 2 side step bracket with the 2 bolts.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }



5. INSTALL NO. 3 SIDE STEP BRACKET LH
  1. Install the No. 3 side step bracket with the 2 bolts.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }