Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE MOULDING

SIDE MOULDING > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH
  1. Install new 9 clips to the front fender moulding sub-assembly LH.

  1. Attach the 9 clips to install the front fender moulding sub-assembly LH.

  1. Install the 6 screws.

  1. w/ Intuitive Parking Assist System:

    1. Install the clip.

  1. Install a new grommet.



2. INSTALL ROCKER PANEL MOULDING COVER LH (w/o Intuitive Parking Assist System)
  1. Attach the 2 clips to install the rocker panel moulding cover LH.

  1. Install the screw.



3. INSTALL ROCKER PANEL MOULDING LH (w/ Intuitive Parking Assist System)
  1. Attach the 15 clips to install the rocker panel moulding LH.

  1. Install the 4 screws.



4. INSTALL FRONT FENDER MUDGUARD LH (w/o Intuitive Parking Assist System)
  1. Install the front fender mudguard LH with the 3 screws and 2clips.



5. INSTALL FRONT FENDER MUDGUARD LH (w/ Intuitive Parking Assist System)
  1. Install the front fender mudguard LH with the screw and 2 clips.



6. INSTALL NO. 3 OUTSIDE MOULDING RETAINER
  1. Attach the claw to install the No. 3 outside moulding retainer.

  1. Install the screws.



7. INSTALL REAR DOOR OUTSIDE MOULDING LH (w/o Intuitive Parking Assist System)
  1. Install new 7 clips to the rear door outside moulding LH.

  1. Attach the 7 clips and 2 claws to install the rear door outside moulding LH.



8. INSTALL REAR DOOR OUTSIDE MOULDING LH (w/ Intuitive Parking Assist System)
  1. Install new 7 clips to the rear door outside moulding LH.

  1. Attach the 7 clips and 2 claws to install the rear door outside moulding LH.



9. INSTALL REAR QUARTER OUTSIDE MOULDING LH
  1. Install new 4 clips to the rear quarter outside moulding LH.

  1. Attach the 4 clips to install the rear quarter outside moulding LH.

  1. Install the 2 screws.