Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE MOULDING

SIDE MOULDING > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE FRONT FENDER OUTSIDE MOULDING PAD LH


B239373
  1. Remove the front fender outside moulding pad.



2. REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD


B239375
  1. Remove the rear door upper outside moulding pad.



3. REMOVE REAR DOOR NO. 1 MOULDING PAD


B239374
  1. Remove the rear door No. 1 moulding pad.



4. REMOVE NO. 1 QUARTER PANEL MOULDING PAD


B239376
  1. Remove the No. 1 quarter panel moulding pad.