Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)

REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT HEADREST ASSEMBLY


    B242816
  1. Pull the rear seat cushion band, release the lock and lift up the back of the seat cushion to rotate it forward.

  1. Remove the rear seat headrest assembly .



2. REMOVE REAR SEATBACK COVER
  1. Press the seatback lock release button to release the lock and fold down the seatback.



    B237641
  1. Using a screwdriver, detach the 4 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH


  1. for Plastic Seatback Board:



      B237976
    1. Detach the 3 claws and clip, and then remove the carpet.



    2. B237978
    3. Using a clip remover, detach the 4 clips.

    4. Detach the 2 claws and remove the carpet.



  1. for Seatback Board with Carpet:



      B237977
    1. Using a clip remover, detach the 5 clips.

    2. Detach the 4 claws and remove the carpet.



4. REMOVE REAR SEATBACK ASSEMBLY LH


B237979
  1. Remove the 2 bolts that secure the seatback to the floor.

  1. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

    NOTICE:
    Be careful not to damage the vehicle body.



5. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


B241735
  1. Remove the bolt and inner belt.