Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side)

REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
  1. Install the inner belt with the 2 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH


B242821E02
  1. Connect the outer belt floor anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    The anchor part of the seat belt must not overlap the protruding part.

    Text in Illustration 
    *a
    Protruding Part

  1. Return the seat cushion to its original position.