Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR NO. 2 SPOILER CLIP

HINT:
Use the same procedure to install the rear No. 2 spoiler clip on the other side.

  1. Attach the 2 claws to install a new rear No. 2 spoiler clip.



2. INSTALL REAR SPOILER SUB-ASSEMBLY
  1. Attach the 3 claws to install the rear spoiler.

  1. Connect the connector.

  1. Install the 4 bolts and 4 grommets.



3. INSTALL REAR NO. 1 SPOILER COVER
  1. Attach the 4 clips to install the rear No. 1 spoiler cover.