Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Side)

BACK DOOR GARNISH (for Side) > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR OUTSIDE MOULDING LH
  1. Attach the 5 clips to install the back door outside moulding.



2. INSTALL BACK DOOR OUTSIDE MOULDING RH

HINT:
Use the same procedure described for the LH side.



3. INSTALL REAR SPOILER SUB-ASSEMBLY
  1. Attach the 3 claws to install the rear spoiler.

  1. Connect the connector.

  1. Install the 4 bolts and 4 grommets.



4. INSTALL NO. 1 REAR SPOILER COVER
  1. Attach the 4 clips to install the rear No. 1 spoiler cover.