Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (for Side)

BACK DOOR GARNISH (for Side) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 REAR SPOILER COVER


B240307
  1. Detach the 4 clips and remove the rear No. 1 spoiler cover.



2. REMOVE REAR SPOILER SUB-ASSEMBLY


    B240308
  1. Remove the 4 grommets and 4 bolts.



    B240309E01
  1. Put protective tape around the rear spoiler.
    Text in Illustration 
    *1
    Protective Tape

  1. Disconnect the connector.

  1. Detach the 3 claws and remove the rear spoiler.



3. REMOVE BACK DOOR OUTSIDE MOULDING LH


B239981E01

NOTICE:
  1. Do not remove the clips.
  2. If the clips are damaged or fall off, replace them with new clips.

  1. Put protective tape around the back door outside moulding.

  1. Detach the 5 clips and remove the back door outside moulding.
    Text in Illustration 
    *1
    Protective Tape



4. REMOVE BACK DOOR OUTSIDE MOULDING RH

HINT:
Use the same procedure described for the LH side.