Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > DISASSEMBLY

for Preparation Click here



1. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    B240243
  1. Disconnect the connector.

  1. Detach the guide.

  1. Remove the 2 screws and back door opener switch assembly.



2. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH


B239988
  1. Detach the 2 clips and No. 2 back door outside garnish.



3. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E199210E01
  1. Remove the 4 screws and light.



4. REMOVE BACK DOOR OUTSIDE GARNISH SEAL


B239989
  1. Remove the back door outside garnish seal.



5. REMOVE NO. 1 BACK DOOR GARNISH RETAINER (w/o Smart Key System)


B239987
  1. Remove the screw and No. 1 back door garnish retainer.



6. REMOVE BACK DOOR CONTROL SWITCH (w/ Smart Key System)


    B240246
  1. Remove the screw.

  1. Detach the claw and remove the back door control switch.