Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › SAFETY CONNECT SYSTEM

SAFETY CONNECT SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK/CLEAR (Using the Techstream)
  1. Check DTC:

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Telematics / Trouble Codes.

    5. Check the DTCs.

  2. Clear DTC:

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Telematics / Trouble Codes.

    5. Clear the DTCs.