1GR-FE INTAKE / EXHAUST > TORQUE SPECIFICATIONS |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
| No. 1 air cleaner hose clamp | 5.0 | 51 | 44 in.*lbf | |
| No. 1 air cleaner hose bolt | 5.0 | 51 | 44 in.*lbf | |
| Front lower bumper cover x Body | 8.0 | 82 | 71 in.*lbf | |
| Air intake duct LH x Body (w/ Intuitive Parking Assist System) | 8.0 | 82 | 71 in.*lbf | |
| Air intake duct RH x Body (w/ Intuitive Parking Assist System) | 8.0 | 82 | 71 in.*lbf | |
| Air tube assembly x Engine | 10 | 102 | 7 | |
| Intake air surge tank x Intake manifold | 28 | 286 | 21 | |
| No. 2 surge tank stay x Cylinder head sub-assembly LH | 21 | 214 | 15 | |
| Throttle body bracket x Intake air surge tank | 21 | 214 | 15 | |
| No. 1 surge tank stay x Cylinder head sub-assembly LH | 21 | 214 | 15 | |
| Intake manifold x Cylinder head sub-assembly LH, RH | 21 | 214 | 15 | |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
| No. 2 manifold stay x Exhaust manifold RH x Front transmission case | 40 | 408 | 30 | |
| Manifold stay x Exhaust manifold LH x Front transmission case | 40 | 408 | 30 | |
| Intake manifold x Cylinder head sub-assembly LH, RH | 21 | 214 | 15 | |
| Exhaust manifold sub-assembly RH x Cylinder head RH | 21 | 214 | 15 | |
| Exhaust manifold RH x No. 1 exhaust manifold heat insulator | 13 | 133 | 10 | |
| Exhaust manifold LH x No. 2 exhaust manifold heat insulator | 13 | 133 | 10 | |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
| Front exhaust pipe assembly x Center exhaust pipe assembly | 43 | 438 | 32 | |
| Center exhaust pipe x Tailpipe assembly | 48 | 489 | 35 | |
| Front exhaust pipe x Front No. 2 exhaust pipe | 48 | 489 | 35 | |
| Exhaust pipe stopper bracket x Crossmember | 19 | 194 | 14 | |
| Exhaust manifold RH x Front exhaust pipe | 54 | 554 | 40 | |
| Exhaust manifold LH x Front No. 2 exhaust pipe | 54 | 554 | 40 | |