Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS

OUTER REAR VIEW MIRROR GLASS > INSPECTION

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSPECT OUTER MIRROR LH


  1. Check the outer mirror heater operation.



      E269775E01
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      25°C (77°F)
      5.3 to 7.9 Ω

      If the result is not as specified, replace the outer mirror LH.