Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

DTC    B158C    SD Card Communication Malfunction

for Preparation Click here


DESCRIPTION

The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.

DTC No.
DTC Detection Condition
Trouble Area
B158C
The SD card cannot be mounted when inserted into the SD card slot.
  1. SD card
  2. Navigation receiver assembly

INSPECTION PROCEDURE

NOTICE:
After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

1.CHECK SD CARD
  1. Turn the ignition switch off and remove the SD card from the SD card slot.

    Result:
    Model
    Proceed to
    The SD card is not damaged.
    A
    The SD card is damaged.
    B



B
REPLACE SD CARD
A


2.CLEAN SD CARD
  1. Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.

  1. Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.

  1. Insert the SD card into the SD card slot.


NEXT


3.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC are output again.

    OK:
    No DTCs are output.



NG
Go to step 4
OK

END 

4.REPLACE SD CARD
  1. Replace the SD card.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC are output again.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END