BODY PANEL SEALING > APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    HINT:
    1. Apply degreasing agent to a clean cloth and clean the sealer application areas.
    2. After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.
    3. If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.


K100445
Flat Finishing
K100446
No Flat Finishing

K105237


K104839


K104840


K104841E02


K104842


K106314


K106316E01


K104844


K104845