ENGINE COMPARTMENT > THREE-DIMENSIONAL DISTANCE


HINT:
  1. Point E, e on the vehicle are asymmetrical.
  2. In cases in which only one dimension is given, left and right are symmetrical.
  1. For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name 
Symbol
Name
Hole Diameter
mm (in.)
A, a
Front Fender Extension Installation nut
M6 (0.24)
B, b
Front Spring Support Installation Hole
φ9.5 (0.37)
C, c
Hood Hinge Installation Nut
M8 (0.31)
D
Cowl Panel Installation Hole
φ7 (0.28)
E, e
Earth Installation Nut
M6 (0.24)
F, f
Front Side Member Standard Hole
φ14 (0.55)
G, g
Radiator Support Upper Installation Nut
M8 (0.31)
H, h
Front Bumper Reinforcement Installation Nut
M8 (0.31)
J, j
Hood Lock Support Installation Nut
M6 (0.24)
K, k
Fender Apron Bracket Standard Hole
φ8 (0.31)
L, l
Radiator Support Upper Installation Nut
M8 (0.31)
M, m
Front Fender Extension Installation nut
M6 (0.24)
N, n
Front Fender Extension Installation nut
M6 (0.24)
O, o
Headlight Installation Nut
M6 (0.24)

K104846E01