QUARTER WHEEL HOUSING OUTER PANEL > ASSEMBLY REPLACEMENT



  1. K105081
    With the quarter panel removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100015
Remove Weld Points
K100016
Remove Weld Points
K100023
Cut and Join Location
REMOVAL POINT
  1. *1 and *2 is reused.
  2. After removing the *1, *2 and quarter lock pillar extension sub-assembly, remove the quarter wheel house panel outer.

K105082E01


K105083E01


K105084E01


K105085E01


INSTALLATION

Symbol meaning
K100017
Spot Weld
K100019
Plug Weld
K100020
Plug Weld
K100021
Plug Weld
K100027
Butt Weld
K100031
Assembly Mark
INSTALLATION POINT
  1. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
  2. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
  3. After welding the quarter wheel house panel outer to the vehicle side, install the quarter lock pillar extension sub-assembly, *1 and *2.
  4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K105086E01


K105087E01


K105088E01


K105089E01