FRONT SIDE MEMBER > CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. K105345
    With the radiator support and front fender mounting bracket removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100023
Cut and Join Location
REMOVAL POINT
  1. Carefully cut the member so not to damage *1.

    Reference Value 
    Area
    Measurement
    Area
    Measurement
    *a
    135 mm (5.31 in.)
    *b
    271 mm (10.67 in.)
    *c
    410 mm (16.14 in.)
    *d
    135 mm (5.31 in.)
    *e
    271 mm (10.67 in.)
    *f
    410 mm (16.14 in.)

K105058E01


K105059E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100027
Butt Weld
INSTALLATION POINT
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K105060E01