SEAT HEATER SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
The main components in the seat heater system have the following functions:
| Component | Function |
| Front Seat Cushion Heater | These seat heaters are sewn into the internal surfaces of the seat cushion and the seat back. It warms up the seat surfaces using the heat caused by electrical resistance. |
| Front Seat Back Heater | |
| Seat Heater Switch | By operating this switch, the seat heater system can be shifted between on (High/Low) and off. |
| FUNCTION |
Seat Heater System
The seat heater system is controlled by the thermostat in the seat heaters.
The LO switch is used to maintain a temperature. Once the seat has warmed up, change to the LO switch.
| CONSTRUCTION |
Seat Heater Switch
When the HI switch or LO switch of the seat heater switch assembly is pressed and the seat heater turns on, the indicator light turns on.

| *1 | Indicator Light | *2 | Seat Heater Switch LH |
| *3 | Seat Heater Switch RH | *4 | HI Switch |
| *5 | LO Switch | - | - |