POWER WINDOW CONTROL SYSTEM > GENERAL



OUTLINE
  1. The power window control system controls power window operation using the power window regulator motors.

  2. A power window regulator master switch with built-in power window ECU is provided on the driver side door. A power window regulator switch with built-in power window ECU is provided on the passenger side door.

  3. The main controls for this system are the power window regulator master switch assembly and the power window regulator switch assembly. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor.

  4. A jam protection function is used in the power window control system.

  5. A index function is used in the power window control system.


PRECAUTION
  1. Ignition Switch Expressions

    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression
      Ignition Switch
      (Position)
      Engine Switch
      (Condition)
      Ignition Switch off
      LOCK
      Off
      Ignition Switch ACC
      ACC
      On (ACC)
      Ignition Switch ON
      ON
      On (IG)
      Engine Start
      START
      Start