DIFFERENTIAL SYSTEM > DETAILS



CONSTRUCTION


  1. Differential Pre-torque Mechanism



    1. A conical spring is provided between the side gear and the side gear washer in the differential. The load of the conical spring applies a friction force to the sliding area to improve the start off performance of the vehicle on slippery road surfaces.


      X108389E01


      Text in Illustration 
      *1
      Pinion Gear Washer
      *2
      Side Gear
      *3
      Conical Spring
      *4
      Side Gear Washer
      *5
      Differential Case
      -
      -
      *a
      Conical Spring Force
      -
      -



  2. Differential Support



    1. Two mount points for the liquid-filled differential, at the front and one at the rear right, have been adopted to reduce vibration and noise.


      X108390E01


      Text in Illustration 
      *a
      A - A Cross Section
      *b
      B - B Cross Section
      *c
      C - C Cross Section
      -
      -
      V100143
      Liquid (Nonfreezing)
      V100144
      Rubber