AUTOMATIC TRANSMISSION SYSTEM > GENERAL



OUTLINE


  1. The TX6A 6-speed automatic transmission [6 Super Electronic Controlled Transmission (ECT)] is used on models with the FA20 engine.



    1. This is a Multi-mode Automatic Transmission equipped shift paddle switches.*

      HINT:
      *: Models with paddle shift switch (transmission shift switch assembly)


      X108748

  2. A shift pattern is provided that has an M position to the side of the D position.

  3. A shift lock system is used.



  4. A shift lock override button, which manually overrides the shift lock mechanism, is provided.


    X108372E01


    Text in Illustration 
    *1
    Shift Lock Override Button
    -
    -
    *a
    Shift Pattern
    -
    -
    V100135
    The shift lever can be moved only with the ignition switch in the ON position and the brake pedal depressed.
    V100136
    The shift lever can be moved anytime.


SPECIFICATION

Automatic Transmission Assembly 
Gear Ratio
1st
3.538
2nd
2.060
3rd
1.404
4th
1.000
5th
0.713
6th
0.582
Reverse
3.168
ATF Cooling System
ATF Warmer
Fluid Type
Toyota Genuine ATF WS
Fluid Capacity
7.5 Liters
(7.9 US qts, 6.6 Imp. qts)
Weight (Reference)*
75.5 kg (166.4 lb)

HINT:
*: Weight shows the figure with the fluid fully filled.


Planetary Gears 
Compound Gear Unit
Front Planetary Gear Assembly
No. of Sun Gear Teeth
33
No. of Pinion Gear Teeth
Inner
19
Outer
18
No. of Ring Gear Teeth
75
Center Planetary Gear Assembly
No. of Sun Gear Teeth
26
No. of Pinion Gear Teeth
20
No. of Ring Gear Teeth
66
Rear Planetary Gear Assembly
No. of Sun Gear Teeth
26
No. of Pinion Gear Teeth
20
No. of Ring Gear Teeth
66

Friction Engagement Components and 1-way Clutch 
No. 1 Clutch (C1)
No. of Discs
4
No. 2 Clutch (C2)
5
No. 3 Clutch (C3)
4
No. 4 Clutch (C4)
4
No. 1 Brake (B1)
3
No. 2 Brake (B2)
4
No. 3 Brake (B3)
3
No. 4 Brake (B4)
5
No. 1 1-way Clutch (F1)
No. of Sprags
21
No. 2 1-way Clutch (F2)
22
No. 3 1-way Clutch (F3)
22
No. 4 1-way Clutch (F4)
25

Torque Converter Assembly 
Torque Converter Type
3-element, 1-step, 2-phase
Stall Torque Ratio
2.000

PRECAUTION
  1. Ignition Switch Expressions

    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression
      Ignition Switch
      (Position)
      Engine Switch
      (Condition)
      Ignition Switch off
      LOCK
      Off
      Ignition Switch ACC
      ACC
      On (ACC)
      Ignition Switch ON
      ON
      On (IG)
      Engine Start
      START
      Start