BRAKE CONTROL SYSTEM > GENERAL



OUTLINE
  1. The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Hill-start Assist Control.

  2. A VSC OFF switch (pattern select switch assembly) is used.

  3. TRACK switch (pattern select switch assembly) is used.

  4. If TRACK mode is selected, the timing of VSC control intervention is delayed and the amount of control is reduced. This increases the control range of the driver and enables sportier driving compared to Normal mode.

  5. An emergency brake signal is used. This signal is provided to indicate that strong braking is being performed by the driver.*

    HINT:
    *: Except Models for Korea


PRECAUTION
  1. Ignition Switch Expressions

    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression
      Ignition Switch (Position)
      Engine Switch (Condition)
      Ignition Switch off
      LOCK
      Off
      Ignition Switch ACC
      ACC
      On (ACC)
      Ignition Switch ON
      ON
      On (IG)
      Engine Start
      START
      Start