METER / GAUGE SYSTEM > DETAILS |
| FUNCTION |
Buzzer Function
The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.
| 1 | Front Seat Belt Warning | 2 | EPS Warning |
| 3 | Entry and Start System Warning*1 | 4 | Key Reminder*2 |
| 5 | Engine Immobiliser Matching Completion Report*1 | 6 | Speed Limiter Warning*3 |
| 7 | Shift Operation Reject Warning*4 | 8 | Rev/Red Zone Warning*5 |
| 9 | Light Reminder | - | - |
Multi-information Display Function
| Display | Display Item | Outline |
![]() | Odometer Display | Displays the odometer. |
![]() | Trip Meter A Display | Displays the trip meter A. |
![]() | Trip Meter B Display | Displays the trip meter B. |
![]() | M/T Shift and Shift-up Indicator Customize Display*1 (While IG OFF) |
|
![]() | Outside Temperature Display | Displays the temperature outside.*2 |
![]() | Instant Fuel Consumption Display |
|
![]() | Average Fuel Consumption After Refueling Display |
|
![]() | Rev Indicator/Red Zone Indicator Customize Display*3 (While a Vehicle Stop) |
|
| OPERATION |
Switching the Multi-information Display
The multi-information display changes in the order shown below by pressing the ODO/TRIP switch or DISP switch.

| *A | Models with M/T Shift and Shift-up Indicator Customize Display Function for M/T | - | - |
| *1 | ODO/TRIP Switch | *2 | DISP Switch |
| *3 | Odometer Display | *4 | Trip Meter A Display |
| *5 | Trip Meter B Display | *6 | M/T Shift and Shift-up Indicator Customize Display: G-On (While IG OFF) |
| *7 | M/T Shift and Shift-up Indicator Customize Display: G- Off (While IG OFF) | *8 | Outside Temperature Display |
| *9 | Instant Fuel Consumption Display | *10 | Average Fuel Consumption After Refueling Display |
| *11 | Rev Indicator/Red Zone Indicator Customize Display (Models with Rev Indicator/Red Zone Indicator) (While a Vehicle Stop) | *12 | Rev Indicator/Red Zone Indicator Customize Display Setup Mode (Models with Rev Indicator/Red Zone Indicator) (While a Vehicle Stop) |
| *a | ODO/TRIP switch short press | *b | ODO/TRIP switch long press |
| *c | DISP switch short press | *d | DISP switch long press |
Rev Indicator/Red Zone Indicator Customize Setup Mode Display
The starting engine revolution count for rev indicator light-up (2000 to 7400 revolutions) and rev/red zone buzzer on/off can be set.
When average fuel consumption is indicated while the vehicle is stopped, pressing the DISP switch quickly displays the rev indicator/red zone indicator customize mode. Holding down the DISP switch changes it to setup mode.

| *A | Rev Indicator Revolution Count Setup Mode | *B | Rev/Red Zone Buzzer On/Off Setup Mode |
| *C | Thousands-Digit Setup Screen | *D | Hundreds-Digit Setup Screen |
| *E | Revolution Count Confirmation Screen | *F | Buzzer On/Off Setup Screen |
| *G | Buzzer Setup Confirmation Screen | - | - |
| *1 | Rev Indicator/Red Zone Indicator Customize Display | - | - |
| *a | Initial display. Displays previous revolution setting if a previous setting value exists. | *b | "REV." and setable area blink during setup mode. |
| *c | Switch input invalid (1 second indication) | - | - |
![]() | DISP switch short press | ![]() | DISP switch long press |
| → | Automatic transition | [] | Setting value |