LIGHTING SYSTEM > GENERAL



OUTLINE


  1. Exterior Light



    1. The exterior lights consist of the following:


      Y118585E01


      Text in Illustration (Models with Halogen Headlight: ) 
      *A
      Except Models for Korea
      *B
      Models for Korea
      *1
      Headlight (Low Beam)
      *2
      Clearance Light
      *3
      Headlight (High Beam)
      *4
      Fog Light Assembly*a or Daytime Running Light*b or Fog Light Assembly and Daytime Running Light*c
      *5
      Front Turn Signal Light
      *6
      Side Turn Signal Light
      *7
      Front Turn Signal Light and Clearance Light
      *8
      Side Marker Light (Front Marker Light Assembly)
      1. *a: Models with fog light assembly
      2. *b: Models with daytime running light
      3. *c: Models with fog light assembly and daytime running light

      Y118586E01


      Text in Illustration (Models with High Intensity Discharge (HID) Headlight: ) 
      *A
      Except Models for Korea
      *B
      Models for Korea
      *1
      Headlight (High/Low Beam)
      *2
      Clearance Light*a or Clearance Light and Daytime Running Light*b
      *3
      Fog Light Assembly
      *4
      Front Turn Signal Light
      *5
      Side Turn Signal Light
      *6
      Daytime Running Ligh
      *7
      Fog Light Assembly
      *8
      Front Turn Signal Light and Clearance Light
      *9
      Side Marker Light (Front Marker Light Assembly)
      -
      -
      1. *a: Models without daytime running light
      2. *b: Models with clearance light and daytime running light

      Y120724E01


      Text in Illustration 
      *A
      Models for Korea
      *B
      Models with Rear Fog Light
      *1
      Side Marker Light
      *2
      Taillight and Stop Light
      *3
      Turn Signal Light
      *4
      Rear Fog Light
      *5
      Back-up Light
      *6
      License Plate Light Assembly
      *7
      High Mounted Stop Light (Center Stop Light Assembly)
      -
      -

  2. Daytime Running Light System (Models with Daytime Running Light System)

    1. The daytime running light system is designed to automatically illuminate the daytime running lights, during the daytime to keep the vehicle highly visible to other vehicles.

  3. Light Emitting Diode (LED) Daytime Running Light/Clearance Light

    1. LED lights (which can be lit up momentarily to ensure a long lifetime) are used for the daytime running lights/clearance lights inside the high intensity discharge (HID) headlights.

  4. High Intensity Discharge (HID) Headlight System

    1. The HID headlight system uses a discharge headlight bulb as light source. Discharge headlight bulbs have features superior to halogen bulbs.

    2. Bi-function increases the upper illumination area of the discharge headlight bulb when the high beam is turned on.

  5. Automatic Headlight Beam Level Control System (Models with HID Headlight System)

    1. When the headlights are on, the automatic headlight beam level control system operates the headlight level motors in accordance with movement of the vehicle.

  6. Manual Headlight Beam Level Control System (Models with Manual Headlight Beam Level Control System)

    1. When the vehicle posture changes in accordance with the number (weight) of passengers and volume of luggage, this system makes it possible to adjust the low beam level (5-steps) manually to the appropriate level. The low beam level is adjusted using the headlight leveling switch.

  7. Automatic Light Control System (Models with Automatic Light Control System)

    1. When the dimmer switch is in the AUTO position, the light control sensor detects the ambient light level and automatically turns the headlights, taillights, side marker lights* and license plate lights on or off accordingly.

    2. This system is controlled by the main body ECU (network gateway ECU).

      1. *: Models for Korea

  8. Follow Me Home System (Models for Europe)

    1. This system is designed to illuminate the low beam headlights for certain period after the vehicle parked.

  9. Light Auto Turn-off System

    1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights*1, taillights, rear fog light*2 or license plate lights on.

      1. *1: Models with front fog light
      2. *2: Models with rear fog light

  10. Light Reminder System

    1. When the driver door is opened with either the headlights or the taillights turned on when the ignition switch is turned off, the buzzer sounds to prevent the driver from forgetting to turn off the lights.


SPECIFICATION

Light
Type
Wattage
Headlight Assembly
Halogen Headlight
High Beam
Halogen Bulb
60
Low Beam
Halogen Bulb
55
Clearance Light*1
Bulb
5
High Intensity Discharge (HID) Headlight
High/Low Beam
Discharge Bulb
35
Clearance Light *5/ Daytime Running Light*3
LED x 6
0.2/3.3
Fog Light Assembly*2 / Daytime Running Light*3 / Fog Light Assembly and Daytime Running Light*4
Bulb
24/13/35 and 13
Front Turn Signal Light*1 / Front Turn Signal Light and Clearance Light*5
Bulb
21/28 and 8
Side Turn Signal Light*1
Bulb
5
Side Marker Light (Front Marker Light Assembly)*5
Bulb
3.8
Rear Combination Light Assembly
Side Marker Light*5
Bulb
5
Taillight / Stop Light
LED x 12
0.2/3.3
Turn Signal Light
Bulb
21
Rear Fog Light*6
Bulb
21
Back-up Light
Bulb
16
License Plate Light Assembly
Bulb
5
High Mounted Stop Light (Center Stop Light Assembly)
LED x 4
0.9
  1. *1: Except models for Korea
  2. *2: Models with fog light assembly
  3. *3: Models with daytime running light
  4. *4: Models with fog light assembly and daytime running light
  5. *5: Models for Korea
  6. *6: Models with rear fog light

PRECAUTION
  1. HID Headlight System

    1. When the HID headlights illuminate, a high voltage (approximately 22000 V) is applied momentarily to the bulb sockets, which could lead to a serious accident. Never connect the tester to the high voltage socket of HID headlight for measurement, as the high voltage may cause a serious accident.

    2. When inspecting the HID headlight system, in order to prevent electric shocks, make sure that water is not present, the light control switch is off, the battery terminal has been removed, and the connector of the headlight light control ECU sub-assembly has been disconnected.

    3. Operate the HID headlight only after assembly has been properly completed, and never operate without bulbs installed.

    4. Do not operate the HID headlight using a power source other than that of the vehicle.

    5. If there is a defect in the HID headlight or if the headlight has suffered a shock, replace the bulb with a new one.

    6. Discharge headlight bulbs reach high temperatures when illuminated. For this reason, the life of a bulb could be shortened if any oil comes in contact with the glass portion of a bulb. Do not touch the glass portion of a bulb with bare hands.

    7. Judgment whether to be externally poor is difficult for the bulb of the HID headlight. Therefore, a quality is judged by check changing for the normal discharge headlight bulb, and making the light switch on.

  2. Ignition Switch Expressions

    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression
      Ignition Switch (Ignition or Starter Switch Assembly)
      (Position)
      Engine Switch (Push Start Switch)
      (Condition)
      Ignition Switch off
      LOCK
      Off
      Ignition Switch ACC
      ACC
      On (ACC)
      Ignition Switch ON
      ON
      On (IG)
      Engine Start
      START
      Start