DIFFERENTIAL OIL > ADJUSTMENT |
| 1. INSPECT DIFFERENTIAL OIL LEVEL |
![]() |
Using a hexagon wrench 10 mm, remove the rear differential filler plug and gasket.
![]() |
Check that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the rear differential filler plug opening.
| *a | 0 to 5 mm (0 to 0.197 in.) |
Inspect for oil leaks if the oil level is low.
Using a hexagon wrench 10 mm, install the rear differential filler plug and a new gasket.
| 2. ADD DIFFERENTIAL OIL |
Using a hexagon wrench 10 mm, remove the rear differential filler plug and gasket.
![]() |
Add differential oil.
| Capacity | Oil Grade |
| 1.10 to 1.20 liters (1.17 to 1.27 US qts, 0.97 to 1.05 Imp. qts) |
|
Using a hexagon wrench 10 mm, install the rear differential filler plug together with a new gasket.