ELECTRIC POWER CONTROL SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Battery Power Supply Control Voltage |
| 11 to 14 V | - |
| Battery Power Supply Back Up Voltage |
| 11 to 14 V | - |
| IG Power Supply Voltage |
| 11 to 14 V | - |
| ACC Voltage |
| 11 to 14 V | - |