Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE

FRONT BRAKE FLEXIBLE HOSE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for RH and LH sides.
  2. The procedure listed below is for LH side.



1. REMOVE FRONT WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.



3. REMOVE NO. 1 FRONT FLEXIBLE HOSE


    C256594
  1. Remove the bolt and separate the No. 1 front flexible hose from the front shock absorber assembly.



    C256621
  1. Remove the union bolt, 2 gaskets and No. 1 front flexible hose.



    C256622
  1. Hold the No. 1 flexible hose with a wrench and disconnect the brake tube using a union nut wrench.

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting position.

  1. Remove the clip.

  1. Remove the No. 1 front flexible hose.