ENGINE OIL TEMPERATURE SENSOR > INSPECTION |
| 1. INSPECT ENGINE OIL TEMPERATURE SENSOR |

| *a | Resistance | *b | Temperature |
| *c | Acceptable | *d | Component without harness connected (Engine oil Temperature Sensor) |
Partially soak the sensor in the water and warm up the water.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Approximately 20°C (68°F) | 2.25 to 2.65 kΩ |
| Approximately 80°C (176°F) | 0.305 to 0.331 kΩ |