Home › Engine / Hybrid System › FA20 ENGINE CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT TIRE RH


2. REMOVE NO. 1 ENGINE UNDER COVER


    A278294
  1. Disengage the 7 clips and remove the 12 bolts and No. 1 engine under cover.



3. DISCONNECT REAR ENGINE UNDER COVER RH
  1. Remove the brake hose bracket mounting bolt.



    A281850
  1. Remove the 3 clips, and disconnect the rear engine under cover RH.



4. REMOVE HEATED OXYGEN SENSOR


    A276546
  1. Disconnect the oxygen sensor connector.

  1. Disengage the 2 clamps.



    A276547E01
  1. Using SST, remove the oxygen sensor from the exhaust manifold assembly.

    SST
    09224-00010