Home › Drivetrain · TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › SPEED SENSOR

SPEED SENSOR > INSPECTION

for Preparation Click here



1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT)


    C206284E04
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Transmission Revolution Sensor (NT))

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the transmission revolution sensor (NT).



2. INSPECT TRANSMISSION REVOLUTION SENSOR (SP2)


    C206284E04
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Transmission Revolution Sensor (SP2))

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the transmission revolution sensor (SP2).