Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > FAIL-SAFE CHART

for Preparation Click here



FAIL-SAFE CHART
This function minimizes the loss of the ECT functions when any malfunction occurs in each sensor or solenoid.
*: AI (Artificial Intelligence) -SHIFT control
In addition to the switching of the shift pattern through the pattern select switch, the AI-SHIFT control enables the ECM to estimate the road conditions and the driver's intention in order to automatically select the optimal shift pattern. As a result, a comfortable ride has been realized.

Malfunction Part
Function
DTC P0717:
Input Speed Sensor NT
During an input speed sensor malfunction, shift control is effected through the output speed sensor signal SP2.
During an input speed sensor malfunction, up-shift to the 5th and 6th, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
DTC P0722:
Output Speed Sensor SP2
During an output speed sensor malfunction, shift control is effected through the input speed sensor signal NT.
During an output speed sensor malfunction, up-shift to the 5th and 6th, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
DTC P0711, P0712, P0713:
ATF Temperature Sensor
During an ATF temperature sensor malfunction, up-shift to the 5th and 6th and flex lock-up clutch control are prohibited.
Shift Solenoid Valve S1, S2, S3, S4 and SR
If the solenoid valve system is open or shorted, the TCM cuts power to all solenoids, leaving just the mechanical hydraulic circuit, requiring manual shifting (fixed to 4th).
DTC P0776, P0961, P0962, P0963, P0965, P0966, P0967:
Shift Solenoid Valve SL1 and SL2
During a solenoid valve SL1 or SL2 malfunction, up-shift to the 5th and 6th and flex lock-up clutch control are prohibited.
DTC P2757, P2758, P2762, P2763, P2764:
Shift Solenoid Valve SLU
During a solenoid valve SLU malfunction, the current to the solenoid valve is stopped. This stops lock-up control and flex lock-up control, fuel economy decreases.
DTC P2714, P2719, P2720, P2721:
Shift Solenoid Valve SLT
During a solenoid valve SLT malfunction, the current to the solenoid valve is stopped. This stops line pressure optimal control, the shift shock increases. However, shifting is effected through normal clutch pressure control.
  1. Fail-safe operation for electronically malfunctioning shift solenoid valve (S1, S2, S3, S4 and SR):

    HINT:
    Fail-safe operation in the event of an electric system malfunction.
    Fail safe function:
    If either of the shift solenoid valve circuits has an open or short failure, the ECM turns the other shift solenoid "ON" and "OFF" in order to shift into the gear positions shown in the table below.
    In case of a short circuit, the ECM stops sending current to the short circuited solenoid.
    Even if staring the engine again in the fail-safe mode, the gear position remains in the same position.


    Operating Condition of Shift Solenoid Valves 
    Shift Lever Position or Shift Range
    Gear Position
    Shift Solenoid Valve
    S1
    S2
    S3
    S4
    SR
    SL1
    SL2
    SLU
    P
    Park
    Off
    On
    On
    On
    On
    Off
    On
    Off
    R*
    Reverse
    Off
    On
    On
    On
    On
    On
    On
    Off
    N
    Neutral
    Off
    On
    On
    On
    On
    On
    On
    Off
    D, M6
    1st
    Off
    On
    On
    Off
    On
    Off
    On
    Off
    2nd
    On
    On
    On
    On
    On
    Off
    Off
    On
    3rd
    On
    Off
    On
    Off
    On
    Off
    Off
    On
    4th*
    On
    Off
    Off
    Off
    On
    Off
    On
    On
    5th*
    On
    Off
    Off
    On
    Off
    On
    Off
    On
    6th*
    On
    On
    Off
    On
    Off
    On
    Off
    On
    M5
    1st
    Off
    On
    On
    Off
    On
    Off
    On
    Off
    2nd
    On
    On
    On
    On
    On
    Off
    Off
    On
    3rd
    On
    Off
    On
    Off
    On
    Off
    Off
    On
    4th*
    On
    Off
    Off
    Off
    On
    Off
    On
    On
    5th*
    On
    Off
    Off
    On
    Off
    On
    Off
    On
    M4
    1st
    Off
    On
    On
    Off
    On
    Off
    On
    Off
    2nd
    On
    On
    On
    On
    On
    Off
    Off
    On
    3rd
    On
    Off
    On
    Off
    On
    Off
    Off
    On
    4th*
    On
    Off
    Off
    Off
    On
    Off
    On
    On
    M3
    1st
    Off
    On
    On
    Off
    On
    Off
    On
    Off
    2nd
    On
    On
    On
    On
    On
    Off
    Off
    Off
    3rd*
    On
    Off
    On
    Off
    On
    Off
    Off
    Off
    M2
    1st
    Off
    On
    On
    Off
    On
    Off
    On
    On
    2nd*
    On
    On
    On
    On
    On
    Off
    Off
    Off
    M1
    1st*
    Off
    On
    On
    Off
    On
    Off
    Off
    Off

    HINT:
    *: Engine braking occurs

  2. Fail-safe operation for mechanically malfunction:

    HINT:
    Fail-safe operation in the event of a mechanical system malfunction.
    Fail safe function:
    The ECM controls the gear position as shown in the table below when malfunctions occur.


    Fail-safe chart for mechanical malfunction: 
    DTC
    Condition
    Gear*1
    -
    Normal
    1st
    2nd
    3rd
    4th
    5th
    6th
    P0751
    Shift solenoid valve S1:
    Stuck OFF malfunction
    1st*2
    2nd
    ↑
    3rd
    3rd
    3rd
    P0762
    Shift solenoid S3:
    Stuck ON malfunction
    1st
    2nd
    ↑
    3rd
    3rd
    3rd
    P0766
    Shift solenoid valve S4, Shift solenoid valve SL2 or Valve body (Brake control valve):
    Malfunction
    1st
    2nd
    ↑
    3rd
    3rd
    3rd
    P0781
    Valve body (1-2 shift valve):
    Malfunction
    1st*2
    2nd
    ↑
    3rd
    3rd
    3rd
    P0729
    Valve body (Sequence valve):
    Malfunction
    1st
    2nd
    ↑
    4th
    5th
    5th

    HINT:
    1. *1: Actual gear shift (gear position) under fail-safe operation
    2. *2: Under engine braking, downshifting to 1st or 2nd gear is prohibited.