Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT OIL PUMP BODY O-RING


    D027950E01
  1. Remove the front oil pump body O-ring from the oil pump assembly.



2. FIX OIL PUMP ASSEMBLY


    C108578E05
  1. Place the oil pump assembly on the torque converter assembly.
    Text in Illustration 
    *1
    Torque Converter Assembly



3. REMOVE CLUTCH DRUM OIL SEAL RING


    C108579
  1. Remove the 3 clutch drum oil seal rings.



4. REMOVE FRONT OIL PUMP OIL SEAL
  1. Remove the oil pump assembly from the torque converter assembly.



    C257588E01
  1. Using a knife, cut through the oil seal lip.
    Text in Illustration 
    *1
    Protective Tape
    *a
    Cut Position

  1. Using a screwdriver with its tip taped, pry out the front oil pump oil seal.

    NOTICE:
    Do not damage the bushing or oil pump body.

    HINT:
    Tape the screwdriver tip before use.