Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > PRECAUTION

for Preparation Click here



1.HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
  1. Turn the cruise control system off using the cruise control main switch (ON-OFF button) when not using the cruise control system.

  2. Be careful as the vehicle speed increases when driving downhill with the cruise control system controlling vehicle speed.

  3. The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.

  4. If the cruise control indicator light turns off or changes to amber without operating the cruise control main switch, there may be a malfunction.

  5. Do not use the cruise control system where the road conditions are as follows:

    1. Heavy traffic
    2. Steep downhill roads
    3. Roads with sharp turns
    4. Icy or snowy roads
    5. Slippery roads

  6. Do not use the cruise control system while towing.


2.IGNITION SWITCH EXPRESSIONS

HINT:
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.


Expression
Ignition Switch (Position)
Engine Switch (Condition)
Ignition switch off
LOCK
Off (Lock)
Ignition switch ACC
ACC
On (ACC)
Ignition switch ON
ON
On (IG)
Engine Start
START
On (Start)