FUEL INJECTOR (for Port Injection) > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE CHAMBER ASSEMBLY |
| 4. REMOVE INJECTOR DRIVER |
![]() |
Move the lock levers in the direction indicated by the arrow to release the 3 connector locks. Disconnect the 4 connectors from the injector driver.
| *1 | Lock Lever |
| *a | Release |
![]() | Lock with Connector |
![]() | Normal Connector |
![]() |
Remove the 3 bolts and injector driver.
| 5. REMOVE INJECTOR COVER (for Bank 1) |
![]() |
Disengage the 4 clamps and separate the wire harness from the injector cover (for bank 1).
![]() |
Remove the 2 bolts and injector cover (for bank 1).
| 6. DISCONNECT NO. 1 FUEL HOSE (for Metal Type) |
![]() |
Using SST, disconnect the No. 1 fuel hose from the fuel delivery pipe sub-assembly (Click here).
| 7. DISCONNECT NO. 3 FUEL HOSE (for Metal Type) |
![]() |
Using SST, disconnect the No. 3 fuel hose from the fuel pipe (Click here).
| 8. DISCONNECT NO. 2 FUEL HOSE (for Metal Type) |
![]() |
Remove the clamp and disconnect the No. 2 fuel vapor feed hose from the fuel pipe.
| 9. REMOVE INJECTOR COVER (for Bank 2) |
![]() |
Remove the bolt and disconnect the wire harness clamp bracket from the injector cover (for bank 2).
![]() |
Remove the 2 bolts and injector cover (for bank 2).
| 10. DISCONNECT NO. 1 FUEL HOSE (for Clamp Type) |
![]() |
Remove the clamp and disconnect the No. 1 fuel hose.
| 11. SEPARATE FUEL DELIVERY PIPE SUB-ASSEMBLY (for Clamp Type) |
![]() |
Remove the bolt and disconnect the fuel delivery pipe sub-assembly.
Disconnect the No. 2 fuel vapor feed hose and move the fuel delivery pipe sub-assembly toward the front of the vehicle.
| 12. REMOVE FUEL DELIVERY PIPE (for Bank 2) |
![]() |
Disconnect the 2 fuel injector assembly connectors.
Disengage the clamp and separate the wire harness.
![]() |
Disconnect the fuel pump assembly connector.
![]() |
Disconnect the No. 2 fuel delivery pipe sub-assembly from the fuel delivery pipe (Click here).
![]() |
Remove the 2 bolts and fuel delivery pipe.
| 13. REMOVE FUEL INJECTOR SEAL (for Bank 2) |
![]() |
Remove the 2 fuel injector seals.
| 14. REMOVE FUEL DELIVERY PIPE (for Bank 1) |
![]() |
Disconnect the 2 fuel injector assembly connectors.
Disengage the clamp and separate the wire harness.
Disconnect the No. 2 fuel delivery pipe sub-assembly from the fuel delivery pipe (Click here).
![]() |
Remove the 2 bolts and fuel delivery pipe.
| 15. REMOVE FUEL INJECTOR SEAL (for Bank 1) |
![]() |
Remove the 2 fuel injector seals.
| 16. REMOVE FUEL INJECTOR ASSEMBLY |
![]() ![]() |
Remove the 4 fuel injector assemblies from the fuel delivery pipe.
![]() |
Remove the fuel injector O-ring and fuel injector grommet from the fuel injector assembly.
| *1 | Fuel injector O-ring |
| *2 | Fuel injector grommet |