Function of Main Components
Component
| Function
|
Certification ECU (smart key ECU assembly)
| - Distinguishes and verifies the ID code from the door control receiver and sends signals to the steering lock actuator assembly (steering lock ECU), etc. in response to operated functions.
- Performs code communication with the ID code box (immobiliser code ECU) and steering lock actuator assembly (steering lock ECU) when the engine is started.*1
- Performs code communication with the steering lock actuator assembly (steering lock ECU) when the engine is started.*2
|
Engine switch
| - Sends engine switch operation signals to the certification ECU (smart key ECU assembly).
- Uses the built-in transponder key amplifier to receive the ID code from the key when the transmitter battery is depleted, and sends the code to the certification ECU (smart key ECU assembly).
|
ID code box (immobiliser code ECU)*1
| Receives immobiliser set/unset commands from the certification ECU (smart key ECU assembly) via LIN communication and sends them to the ECM.
|
ECM
| Receives immobiliser unset commands from the ID code box (immobiliser code ECU) and engine start request signals from the certification ECU (smart key ECU assembly) and starts the engine.
|
Steering lock actuator assembly (steering lock ECU)
| Receives a steering lock unlock signal from the certification ECU (smart key ECU assembly) or ID code box (immobiliser code ECU) and unlocks the steering lock.*1 Receives a steering lock unlock signal from the certification ECU (smart key ECU assembly) and unlocks the steering lock.*2
|